Light Burnt Magnesium Powder Factory

Light-burned magnesium powder fireproof board is a new product of magnesite technological innovation in recent years, which is economical and practical. Light-burned magnesium powder fireproof board is used in the whole country and even in the world. There are many manufacturers all over the place, and the light-burning magnesium powder fireproof board is lightweight, fireproof, clean and easy to use. The magnesium oxide content is the key in the light-burned magnesium powder fireproof board, and other small chemical indicators of the light-burned magnesium powder also determine the quality of the light-burned magnesium powder fireproof board. The selection of qualified high-grade light-burned magnesium powder is one of the first conditions for making high-quality fireproof boards. Magnesium oxide with high activity is an ideal choice for making fireproof boards.

Fused magnesia manufacturers

 Since the tank of the light-burning powder biogas tank will be in contact with water for a long time, the water resistance requirements of the product are relatively special, and at the same time, it must have good stability. Use high-content light-burning magnesia powder, such as: 88% light Burnt magnesia powder. In the selection of ore, special ore with ultra-low caustic soda content can be used to control the caustic soda content of the finished product; in addition, the control of caustic soda can improve the water resistance of the product. Light burning powder factory

 1 The weight of each batch of finished products is not more than 120 t.

 Light Burnt Magnesium Powder

 2 Samples for particle size determination should be sampled before batching, and samples for chemical analysis should be sampled after batching. Small bags (25kg) take one incremental sample per 20 bags, and one incremental sample per large bag (1000kg).

 After fully mixing the obtained particle size sample, point 10-20g to measure the particle size. The mixed test samples were reduced to 200g and sent to the laboratory for analysis.

 3 If a certain chemical composition is unqualified or abnormal in the inspection result, double the number of samples in the same batch of products shall be taken for re-inspection once, and the re-inspection result shall be the final inspection result of the batch of products. Light Burnt Magnesium Powder Factory